Strongest kite canopy material on the market featuring 4x-reinforced ripstop
Front-loading zip bag = quick & convenient packing
Front & bottom drainage mesh = enhanced ventilation
Centipede strap = link multiple kite bags for hands-free carrying
Side pump attachment
Kiteboard carry straps
Trailing edge reinforcement for reduced flutter and canopy sheer/wear
Angled Wing Tip
Torsion transmission to entire LE and low drag on water for relaunch
Consistent forward drive + maximum depower + no back-stalling
Constant Leading Edge Taper
Increased rigidity in wing tip for sharper turning
Lightweight, light wind performance + faster turning
High Flow Valve
One-way valve for reduced frictional force + easy inflation + immediate deflation
The arc generates maximum projected area for power and lift while the swept design provides precision turning, control and ideal relaunch capabilities.
Lightweight Solid Frame Construction
Every strut is attached to an optimized, lightweight frame consisting of heavy-duty dacron that is then sewn onto the canopy for unmatched resistance to wear and heavy loads.
The profile’s depth and shape evolves along the airfoil, helping create a fast flying, stable kite with less back stalling. The center sections generate power thanks to a deeper profile, while the flatter profile in the tips minimizes drag and allows faster turning.
Radial Segmented Arc
The radial segmented shape uses short linear segments to a ccurately form the kite’s arc.
Low Drag Wing Tip
This wing tip geometry decreases the overall surface area of the non-lifting portion, greatly reducing drag. The more efficient the lift/drag ratio becomes, the faster the wing tip can move through the air. This allows the kite to be both quicker and more responsive through turns.
Octopus Inflation System
This proven, quick, and easy single-point inflation system creates uniform pressure in the struts and leading edge. Naish’s exclusive one-way internal valve ensures that the pressure within the struts does not change during turns.
EASY ACCESS ZIPPER PLACEMENT
Extremely easy access to the internal valve when replacing bladders.
MOLDED TE REINFORCEMENT
Optimal trailing edge protection with a molded reinforcement at the end of each strut.
Large thermo-molded bumpers wrap around the leading edge, which provide seam protection when landing and launching the kite.
Patches along LE segments to protect the seams.
Trailing edge reinforcement for reduced flutter and canopy sheer/wear.
2-PIECE LEADING EDGE
This construction provides better twist control of the leading edge, and improves turning performance.
DEFLATE VALVE DOUBLE VELCRO CLOSURE
The deflate valve has a double-Velcro closure design to ensure closure during impact.
REINFORCED STRUT ZIPPERS
A double-Velcro flat enclosure ensures that the zipper will not fail under load.
VERTICAL SEAM STRUTS
A reduction in the number of pieces used in the struts means more precision in defining the canopy profile. The seams are also reinforced with an extra layer of webbing, and double zigzag stitches to avoid breakage.
HIGH FLOW VALVE
One-way valve for reduced frictional force, easy inflation and immediate deflation.